In the process of processing, the emery wheel should be used to polish and polish the belt. Generally, the wheel should be removed for cleaning after 5-7 days of operation. (There are rubber slag polished on the top, which adheres firmly to the surface of the emery after high temperature friction, which is more difficult to clean.) Now we soak in acetone for 2 hours and then clean it with imported detergent. The actual effect is very good, but Not environmentally friendly and energy-saving.
Resin grinding wheel cleaning regulations:
1. To be environmentally friendly, no ketones, no halogenated hydrocarbons.
2. Do not damage the diamond wheel
Precautions for resin grinding wheel installation:
The grinding wheel must be carefully inspected and identified before installation. The inspection and identification process is as follows:
1. Check whether the grade of the grinding wheel is correct and whether it conforms to the characteristics, appearance and specifications of the grinding wheel used.
2. Check and distinguish the appearance and structure of the grinding wheel. Use both eyes to check whether the appearance of the grinding wheel is damaged (or cracked). Grinding wheels with damaged appearance (or cracks) cannot be used. The other is to check whether the two sides of the grinding wheel are flat, and there should be no obvious tilt.
3. Check and identify the internal cracks of the grinding wheel. Hold the grinding wheel in your hand, and hit the grinding wheel with a mallet to listen to the sound. The grinding wheel without cracks emits a crisp sound, and the grinding wheel with cracks is hoarse. If there is a crack, it cannot be used.